Cisco ASR 901

1-200
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
table-map
router bgp 100
address-family ipv4 unicast
table-map tag
Related Commands Command Description
address-family ipv4 (BGP) Places the router in address family configuration mode for
configuring routing sessions such as BGP, RIP, or static routing
sessions that use standard IP Version 4 address prefixes.
address-family vpn4 Places the router in address family configuration mode for
configuring routing sessions such as BGP, RIP, or static routing
sessions that use standard VPN Version 4 address prefixes.
match as-path Matches a BGP autonomous system path access list.
match ip address Distributes any routes that have a destination network number
address that is permitted by a standard or extended access list, and
performs policy routing on packets.
match ip next-hop Redistributes any routes that have a next hop router address passed
by one of the access lists specified.
route-map (IP) Defines the conditions for redistributing routes from one routing
protocol into another, or enables policy routing.