Cisco ASR 901 User Manual

1-201
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
termination
termination
Configures the DSL interface to function as central office equipment or customer premises equipment.
Use the no form of this command to remove the configuration.
termination {co | cpe}
no termination {co | cpe}
Syntax Description
Defaults The default setting is cpe.
Command Modes Controller configuration
Command History
Examples The following example shows how to use the termination command:
Router# configure terminal
Router(config)# controller shdsl2/0
Router(config-controller)# equipment-type co
Related Commands
co The WIC functions as central office equipment and can interface with
another G.SHDSL WIC configured as cpe
cpe The WIC functions as customer premises equipment and can interface with
a DSLAM or with another G.SHDSL WIC configured as co.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.
Command Description
controller Configures the digital subscriber line (DSL) controller.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours