Safety Recommendations
Follow these guidelines to ensure general safety:
• Never attempt to lift an object that might be too heavy for you to lift by yourself.
• Keep the chassis area clear and dust-free during and after installation.
• If you remove the chassis cover, place it in a safe place.
• Keep tools and chassis components away from walk areas.
• Do not wear loose clothing that may get caught in the chassis. Fasten any tie or scarf and roll up sleeves.
• Wear safety glasses when working under conditions that might be hazardous to your eyes.
• Do not perform any action that may create a hazard to people or makes equipment unsafe.
Safety with Electricity
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning
Avoid Servicing Outdoor Connections During an Electrical Storm
Avoid using or servicing any equipment that has outdoor connections during an electrical storm. There
may be a risk of electric shock from lightning. Statement 1088
Warning
Installation Instructions
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning
Follow these guidelines when working on equipment powered by electricity:
• Locate the emergency power-off switch in the room in which you are working. If an electrical accident
occurs, you can quickly turn off the power.
• Disconnect all power before doing the following:
• Installing or removing a chassis
• Working near power supplies
• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension
cables, frayed power cords, and missing safety grounds.
• Do not work alone if hazardous conditions exist
• Never assume that power is disconnected from a circuit. Always check
• Never open the enclosure of the internal power supply
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
20
Prepare for Installation
Safety Recommendations
To Next Page
Loading...
Need help?
General
