Cisco Catalyst 8300 Series User Manual

Figure 30: Chassis Ground Connection on the C8300 1N1S-4T2X|6T
Ground lug1
Figure 31: Chassis Ground Connection on the C8300 2N2S-4T2X|6T
Step 4 Connect the other end of the ground wire to a known reliable earth ground point at your site.
Ground lug1
Connect Power to the Device
This section explains how to connect power to the device.
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
47
Install and Connect
Connect Power to the Device

Cisco Catalyst 8300 Series Specifications

General

Software	Cisco IOS XE
Interface Modules	Modular
WAN Ports	Varies based on module selection
LAN Ports	Varies based on module selection
Redundancy	Yes, with dual power supplies and modular components
Security	Integrated threat defense, encryption, and secure boot
Management	Cisco DNA Center, CLI, SNMP, REST APIs
Form Factor	Rack-mountable
Rack Height	1RU or 2RU
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, 25 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Serial
Power Supply	Redundant power supply options available
Key Features	SD-WAN, advanced security
Product Family	Catalyst
Port Density	Varies based on module selection
Dimensions	Varies by model
Weight	Varies by model and module selection