Cisco Catalyst 8300 Series User Manual

Install the PoE Converter Power Supply 85
Replace a Fan Tray for Cisco Catalyst 8300 Series Edge Platforms 86
Before Replacing a Fan Tray 86
Replace a Fan Tray in a C8300-2N2S-4T2X|6T 86
Remove the Fan Tray Air Filter from a C8300-2N2S-4T2X|6T 87
Remove the Fan Tray from a C8300-1N1S-4T2X|6T 87
Install the Fan Tray into a C8300-1N1S-4T2X|6T 88
Install and Remove SFP and SFP+ Modules 89
Laser Safety Guidelines 90
Remove Small Form Pluggable Modules 91
Remove and Replace the USB Flash Token Memory Stick 92
Remove and Install an M.2 USB|NVMe Module 93
Prevent Electrostatic Discharge Damage 93
Remove the M.2 USB|NVMe Module 94
Install the M.2 USB|NVMe Module 95
Install Cisco Catalyst Network Interface Module 97
CHAPTER 5
Overview of the Network Interface Module 97
97
Remove and Install Network Interface Modules 98
Remove the Network Interface Module 99
Install the Cisco Catalyst Network Interface Modules 99
Remove and Install Network Interface Modules Adapter 99
100
Remove the Network Interface Module Adapter 100
Install Network Interface Module Adapter 101
Install Network Interface Modules in the NIM Adapter 102
Install Cisco Catalyst Service Module 103
CHAPTER 6
Prepare for Installation 103
Equipment That You Need 103
Remove the Cisco Catalyst Service Module 104
Install a Cisco Catalyst Service Module 104
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
vi
Contents

Cisco Catalyst 8300 Series Specifications

General

Brand	Cisco
Model	Catalyst 8300 Series
Category	Network Hardware
Language	English