Cisco Catalyst 8300 Series User Manual

Install the Silicon Labs Mac USB Device Driver 51
Connect WAN and LAN Interfaces 51
Ports and Cabling 52
Connection Procedures and Precautions 52
Install Internal Components and Field Replaceable Units 55
CHAPTER 4
Safety Warnings 55
Locate and Access Internal Components 56
Remove and Replace the Chassis Cover 58
Remove the Chassis Cover 58
Replace the Cover 59
Remove and Replace DDR DIMMs 60
Locate and Orient DIMM 61
Remove a DIMM 61
Install a DIMM 62
Remove and Replace the Power Supplies 63
AC Power Supplies 64
Overview of the AC Power Supply 64
Remove and Replace the AC and HVDC Power Supply (C8300-1N1S-4T2X|6T) 67
69
Remove and Replace the AC Power Supply (C8300-2N2S-4T2X|6T) 69
71
DC Power Supplies 72
Overview of the DC Power Supplies 72
Remove and Replace the DC Power Supply (C8300-1N1S-4T2X|6T) 74
76
Remove and Replace the DC Power Supply (C8300-2N2S-4T2X|6T) 76
79
Install the DC Input Power 79
Prepare the Wire for Connecting to the DC Power Supply 79
Remove and Install PoE Converter Power Supply Unit 82
Remove the PoE Power Supply Slot Filler 83
Install the PoE Power Supply Slot Filler 83
Remove the PoE Converter Power Supply 84
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
v
Contents

Cisco Catalyst 8300 Series Specifications

General

Brand	Cisco
Model	Catalyst 8300 Series
Category	Network Hardware
Language	English