Cisco Catalyst 9400

PurposeCommand or Action
Enters Call Home configuration mode.call-home
Example:
Step 5
Device(config)# call-home
Configures the proxy server information to the
Call Home service.
http-proxy proxy-address proxy-port
port-number
Example:
Step 6
Device(config-call-home)# http-proxy
198.51.100.10 port 5000
Exits Call Home configuration mode and enters
global configuration mode.
exit
Example:
Step 7
Device(config-call-home)# exit
Exits global configuration mode and enters
privileged EXEC mode.
exit
Example:
Step 8
Device(config)# exit
Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 9
Device# copy running-config
startup-config
Removing and Returning an Authorization Code
To remove and return an SLR authorization code, complete the following steps.
Before you begin
Supported topologies: all
Procedure
PurposeCommand or Action
Enables privileged EXEC mode. Enter your
password, if prompted.
enable
Example:
Step 1
Device> enable
Ensure that the license that you want to remove
and return is not in-use. If it is in-use, you must
first disable the feature.
show license summary
Example:
Device# show license summary
Step 2
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
154
Smart Licensing Using Policy
Removing and Returning an Authorization Code