Cisco Catalyst 9400 User Manual

PurposeKeyword
Displays field-replaceable unit (FRU) operational
status and power and power supply fan sensor
information.
status
Displays the summary of all the environment
monitoring sensors.
summary
Displays a sensor state table.table
Displaying Environment Conditions
Supervisor modules and their associated line cards support multiple temperature sensors per card. The
environment condition output includes the temperature reading from each sensor and the temperature thresholds
for each sensor. These line cards support three thresholds: warning, critical, and shutdown.
The following example illustrates how to display the environment condition on a supervisor module. The
thresholds appear within parentheses.
Device# show environment
Number of Critical alarms: 0
Number of Major alarms: 0
Number of Minor alarms: 0
Slot Sensor Current State Reading Threshold(Minor,Major,Critical,Shutdown)
---- ------ ------------- ------- ---------------------------------------
R0 HotSwap: Volts Normal 53 V DC na
R0 HotSwap: Power Normal 231 Watts na
R0 Temp: Coretemp Normal 46 Celsius (107,117,123,125)(Celsius)
R0 Temp: DopplerD Normal 55 Celsius (107,117,123,125)(Celsius)
R0 V1: VX1 Normal 845 mV na
R0 V1: VX2 Normal 1499 mV na
R0 V1: VX3 Normal 1058 mV na
R0 V1: VX4 Normal 849 mV na
R0 V1: VX5 Normal 1517 mV na
R0 V1: VX6 Normal 1306 mV na
R0 V1: VX7 Normal 1007 mV na
R0 V1: VX8 Normal 1098 mV na
R0 V1: VX9 Normal 1205 mV na
R0 V1: VX10 Normal 1704 mV na
R0 V1: VX11 Normal 1208 mV na
R0 V1: VX12 Normal 1804 mV na
R0 V1: VX13 Normal 2518 mV na
R0 V1: VX14 Normal 3288 mV na
R0 Temp: outlet Normal 39 Celsius (55 ,65 ,75 ,100)(Celsius)
R0 Temp: inlet Normal 35 Celsius (45 ,55 ,65 ,72 )(Celsius)
The following example illustrates how to display the LED status on a supervisor module.
Device# show hardware led
Current Mode: STATUS
SWITCH: C9407R
SYSTEM: AMBER
SUPERVISOR: ACTIVE
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
222
Environmental Monitoring and Power Management
Displaying Environment Conditions

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP