Cisco Catalyst 9400 User Manual

Examples: Configuring Summer Time
This example (for daylight savings time) shows how to specify that summer time starts on March 10 at 02:00
and ends on November 3 at 02:00:
Device(config)# clock summer-time PDT recurring PST date
10 March 2013 2:00 3 November 2013 2:00
This example shows how to set summer time start and end dates:
Device(config)#clock summer-time PST date
20 March 2013 2:00 20 November 2013 2:00
Example: Configuring a MOTD Banner
This example shows how to configure a MOTD banner by using the pound sign (#) symbol as the beginning
and ending delimiter:
Device(config)# banner motd #
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
#
Device(config)#
This example shows the banner that appears from the previous configuration:
Unix> telnet 192.0.2.15
Trying 192.0.2.15...
Connected to 192.0.2.15.
Escape character is '^]'.
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
User Access Verification
Password:
Example: Configuring a Login Banner
This example shows how to configure a login banner by using the dollar sign ($) symbol as the beginning
and ending delimiter:
Device(config)# banner login $
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
38
Administering the Device
Examples: Configuring Summer Time

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP