Cisco Catalyst 9400

PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Step 2
Device# configure terminal
Enables Smart transport mode.license smart transport smart
Example:
Step 3
Device(config)# license smart transport
smart
Automatically configures the Smart URL
(https://smartreceiver.cisco.com/licservice/
license smart url default
Example:
Step 4
license). For this option to work as expected,
Device(config)# license smart transport
default
the transport mode in the previous step must be
configured as smart.
Configures a proxy for the Smart transport
mode. When a proxy is configured, licensing
license smart proxy {address
address_hostname|port port_num}
Step 5
messages are sent to the proxy along with the
Example:
final destination URL (CSSM). The proxy sends
Device(config)# license smart proxy
198.51.100.10 port 3128
the message on to CSSM. Provide the address
and port information:
• address address_hostname: Specifies the
proxy address. Enter the IP address or
hostname of the proxy server.
• port port_num: Specifies the proxy port.
Enter the proxy port number.
Exits global configuration mode and returns to
privileged EXEC mode.
exit
Example:
Step 6
Device(config)# exit
Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 7
Device# copy running-config
startup-config
Configuring the Call Home Service for Direct Cloud Access
The Call Home service provides email-based and web-based notification of critical system events to CSSM.
To configure the transport mode, enable the Call Home service, and configure a destination profile (A
destination profile contains the required delivery information for an alert notification. At least one destination
profile is required.), complete the following steps:
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
150
Smart Licensing Using Policy
Configuring the Call Home Service for Direct Cloud Access