EasyManuals Logo

Cisco Catalyst 9400 User Manual

Cisco Catalyst 9400
458 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
PurposeCommand or Action
The no license smarturl smartsmart_url
command reverts to the default URL.
utility smart_url: Although available on
the CLI, this option is not supported.
(Optional) Sets the reporting interval in days.
By default the RUM report is sent every 30
days. The valid value range is 1 to 3650.
license smart usage interval interval_in_days
Example:
Device(config)# license smart usage
interval 40
Step 5
If you set the value to zero, RUM reports are
not sent, regardless of what the applied policy
specifies - this applies to topologies where
CSLU or CSSM may be on the receiving end.
If you set a value that is greater than zero and
the transport type is set to off, then, between
the interval_in_days and the policy value for
Ongoing reporting frequency(days):, the
lower of the two values is applied. For example,
if interval_in_days is set to 100, and the value
in the in the policy says Ongoing reporting
frequency (days):90, RUM reports are sent
every 90 days.
If you do not set an interval, and the default is
effective, the reporting interval is determined
entirely by the policy value. For example, if the
default value is effective and only unenforced
licenses are in use, if the policy states that
reporting is not required, then RUM reports are
not sent.
Exits global configuration mode and returns to
privileged EXEC mode.
exit
Example:
Step 6
Device(config)# exit
Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 7
Device# copy running-config
startup-config
Configuring a License
In the Smart Licensing Using Policy environment, you can use this task to change the license level being used
on the product instance, or to additionally configure an add-on license on the product instance. For example,
if you are currently using Network Advantage and you also want to use features available with a corresponding
Digital Networking Architecture (DNA) Advantage license, you can configure the same using this task. Or
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
163
Smart Licensing Using Policy
Configuring a License

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 9400 and is the answer not in the manual?

Cisco Catalyst 9400 Specifications

General IconGeneral
Product SeriesCatalyst 9400 Series
LayerLayer 2/3
Operating SystemCisco IOS XE
Switch TypeModular
Uplink Interfaces10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
StackingNo
Form FactorModular Chassis
Operating Temperature0°C to 40°C (32°F to 104°F)
RedundancyPower supplies
Security FeaturesMACsec
ManagementCisco DNA Center, CLI, SNMP

Related product manuals