Cisco Catalyst 9400

Input
Output
-----
------
Protocol Packet Count
Packet Count
Byte Count
Byte Count
30sec Bit Rate (bps)
30sec Bit Rate (bps)
30sec Max Bit Rate (bps)
30sec Max Bit Rate (bps)
------------------------ ------------------------
---------------------------------------------------
ms-lync 60580
55911
31174777
28774864
3613000
93000
3613000
3437000
Total 60580
55911
31174777
28774864
3613000
93000
3613000
3437000
show policy-map interface
Displays the QoS statistics and the configured policy maps on all interfaces.
The following is a sample output for the policy-maps configured on all the interfaces:
Device# show policy-map int
GigabitEthernet1/0/1
Service-policy input: MARKING-IN
Class-map: NBAR-VOICE (match-any)
718 packets
Match: protocol ms-lync-audio
0 packets, 0 bytes
30 second rate 0 bps
QoS Set
dscp ef
Class-map: NBAR-MM_CONFERENCING (match-any)
6451 packets
Match: protocol ms-lync
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
208
Configuring Application Visibility and Control in a Wired Network
Examples: Application Visibility and Control Configuration