Cisco Catalyst 9400

To Next Page

To Previous Page

Policy Based Routing ACEs / NAT ACEs: 2048

Netflow Input ACEs: 1024

Netflow Output ACEs: 2048

Ingress Netflow ACEs: 1024

Egress Netflow ACEs: 2048

Flow SPAN ACEs: 1024

Tunnels: 1024

LISP Instance Mapping Entries: 1024

Control Plane Entries: 1024

Input Netflow flows: 65536

Output Netflow flows: 65536

SGT/DGT (or) MPLS VPN entries: 8192

SGT/DGT (or) MPLS VPN Overflow entries: 512

Wired clients: 2048

MACSec SPD Entries: 1024

MPLS L3 VPN VRF: 255

MPLS Labels: 12288

MPLS L3 VPN Routes VRF Mode: 32768

MPLS L3 VPN Routes Prefix Mode: 4096

MVPN MDT Tunnels: 1024

L2 VPN EOMPLS Attachment Circuit: 1024

MAX VPLS Bridge Domains : 128

MAX VPLS Peers Per Bridge Domain: 32

MAX VPLS/VPWS Pseudowires : 4096

These numbers are typical for L2 and IPv4 features.

Some features such as IPv6, use up double the entry size;

so only half as many entries can be created.

* values can be modified by sdm cli.

This is an example output showing the advanced template information on Cisco Catalyst 9400 Series Supervisor

1XL Module

Device

This is the Access template.

Number of VLANs: 4094

Unicast MAC addresses: 65536

Overflow Unicast MAC addresses: 1024

L2 Multicast entries: 16384

Overflow L2 Multicast entries: 1024

L3 Multicast entries: 16384

Overflow L3 Multicast entries: 1024

Directly connected routes: 49152

Indirect routes: 65536

STP Instances: 1024

Security Access Control Entries: 18432

QoS Access Control Entries: 18432