Cisco Catalyst 9400 User Manual

These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
Factory reset erases all the customer-specific data
stored in a device and restores the device to its
original configuration at the time of shipping
Factory ResetCisco IOS XE Fuji 16.8.1a
Performing a factory reset erases the contents of
removable storage devices, such as SATA, SSD,
or USB.
Factory Reset for
Removable Storage
Devices
Cisco IOS XE Gibraltar
16.12.1
A factory reset can be performed to erase all the
content from the device securely with 3-pass
overwrite. The secure 3-pass keyword was
introduced.
Factory Reset with
3-pass Overwrite
Cisco IOS XE Amsterdam
17.2.1
Support for factory reset on stacked devices and
for Cisco StackWise Virtual enabled devices is
introduced.
Enhanced Factory Reset
Option for Stack and
Cisco StackWise Virtual
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
346
Performing Factory Reset
Feature History for Performing a Factory Reset

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP