Cisco Catalyst 9400 User Manual

PurposeCommand or Action
For destination-url, specify the destination URL
alias for the local or network file system and
the name of the file to create:
Example:
Device# archive tar /create
tftp:172.20.10.30/saved.
flash:/new-configs
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/dir ectory]/-filename.
• TFTP syntax:
tftp:[[//location]/directory]/-filename.
For flash:/file-url, specify the location on the
local flash file system in which the new file is
created. You can also specify an optional list
of files or directories within the source directory
to add to the new file. If none are specified, all
files and directories at this level are written to
the newly created file.
Displays the contents of a file.archive tar /table source-url
Step 2
Example:
For source-url, specify the source URL alias
for the local or network file system. The
Device# archive tar /table
flash: /new_configs
-filename. is the file to display. These options
are supported:
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/dir ectory]/-filename.
• TFTP syntax:
tftp:[[//location]/directory]/-filename.
You can also limit the file displays by
specifying a list of files or directories after the
file. Only those files appear. If none are
specified, all files and directories appear.
Extracts a file into a directory on the flash file
system.
archive tar /xtract source-url flash:/file-url
[dir/file...]
Step 3
Example:
For source-url, specify the source URL alias
for the local file system. The -filename. is the
Device# archive tar /xtract
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
373
Working with the Flash File System
Creating, Displaying and Extracting Files

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP