Cisco Catalyst 9400

Feature InformationFeatureRelease
Auto Consolidation of Line
commands is enabled by default.
The no line auto-consolidation
command can be used to disable
the auto consolidation of Line
commands.
The line auto-consolidation
command was introduced.
Line Auto ConsolidationCisco IOS XE Bengaluru 17.4.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
440
Line Auto Consolidation
Feature History for Line Auto Consolidation