Cisco Catalyst 9400 User Manual

PurposeCommand or Action
0000.0009.0a05.08661.7574.6f69.6e73.7461.6c6c.5f64.686370
Uploads the text file to the device.copy tftp flash filename.txt
Example:
Step 8
Device(config)# copy tftp flash
image.bin
Uploads the tar file for the new image to the
device.
copy tftp flash imagename.bin
Example:
Step 9
Device(config)# copy tftp flash
image.bin
Returns to global configuration mode.exit
Example:
Step 10
Device(dhcp-config)# exit
Specifies the Cisco IOS configuration file on
the TFTP server.
tftp-server flash: config.text
Example:
Step 11
Device(config)# tftp-server
flash:config-boot.text
Specifies the image name on the TFTP server.tftp-server flash: imagename.bin
Example:
Step 12
Device(config)# tftp-server
flash:image.bin
Specifies the text file that contains the name
of the image file to download
tftp-server flash: filename.txt
Example:
Step 13
Device(config)# tftp-server
flash:boot-config.text
Specifies the address of the client that will
receive the configuration file.
interface interface-id
Example:
Step 14
Device(config)# interface
gigabitEthernet1/0/4
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
57
Performing Device Setup Configuration
Configuring DHCP Auto-Image Update (Configuration File and Image)

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP