Connectors and Ports on the Top
Figure 1: CW9163E Top Connectors and Ports
Port B
This port supports a 6-GHz antenna only.
Clear band
3Port A
This port supports 6-GHz + SIA.
Yellow band
1
SMA connector port
This port connects to the GNSS antenna
only.
2
Connectors and Ports on the Base
Figure 2: CW9163E Base Connectors and Ports
Console Port
If the port is not used, do not remove the
covering plug. Otherwise, it might lead
to water leaking into the AP.
4LED1
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
6
Hardware Features
Connectors and Ports on the AP