• Ethernet RJ-45 connector and installation tool
• Ground rod, as required by local regulations
Cisco Orderable Accessories
Order the following accessories separately from Cisco:
• AP-mounting brackets to mount the CW9163E AP.
DescriptionMounting Brackets
Vertical mount to a wall or 2 to 5 inch (51 to 127 mm) diameter poleAIR-MNT-VERT1=
• Accessory kits
DescriptionAccessory Kit
This kit contains the following items:
• CAT 5e RJ45 Ethernet port plug and gland assembly (Qty:
5)
• RJ45 port dust caps (Qty: 2)
• Ground lug (Qty: 1)
• DC plug (Qty 1)
AIR-ACC-KIT1=
Lightning Arrestor kitAIR-ACC245LA-N=
CAT 6/6A Ethernet connector and cable gland assembly. Qty:
5
AIR-ACC-CAT6=
• Supported power injectors.
DescriptionPower Source
30 W rated single-port PoE injectorAIR-PWRINJ6=
65 W rated single-port PoE injector (802.3bt), mGig EthernetAIR-PWRINJ7=
37 W rated power injectorIW-PWRINJ-60RGDMG=
30 W rated single-port PoE injector
This power injector is in End of Life (EoL)
stage.
Note
MA-INJ-4
60 W rated PoE injector (802.3bt), mGig EthernetMA-INJ-6
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
13
Installing the Access Point
Cisco Orderable Accessories
To Next Page
Loading...
Need help?
General
