Step 7 Choose Configuration > Wireless > Advanced > 6 GHz Client Steering
Step 8 Configure the threshold values.
You can set the threshold values to meet your requirements.
Step 9 Click Apply.
Meraki Cloud Based Deployment
You can associate the CW9163E AP to a Meraki Cloud based deployed network.
Claiming an AP in a Dashboard
In a cloud-based deployment, the access points need to be onboarded from the common pool.
Procedure
Step 1 Initiate adding the APs
You can initiate the AP add process from either of the following ways:
• Network-wide > Configure > Add Devices
• Organization > Configure > Inventory
Step 2 Filter the APs using the Search Inventory
You can search for the devices or group of devices with any of the following parameters:
• MAC address
• Serial number (12–digit number)
• Network name
• Model number
• Order number (09-digit Cisco Meraki order number)
• Country code
Step 3 Click Claim
The devices are added to the available devices list.
Configuring Firewall for Cloud Management Access
The onboarding APs need to connect with the Cloud management to ensure that the outgoing connections on
specific IP addresses and ports are open for this connection to be established.
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
48
Network Deployment
Meraki Cloud Based Deployment
To Next Page
Loading...
