Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine - Page 125

C-17
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
Syntax Description
Example
acsappl1> tracert 10.19.253.228
Tracing route to 10.19.253.228 over a maximum of 30 hops
1 <10 ms <10 ms <10 ms champaign-gw1.cisco.com [171.69.180.1]
2 40 ms 50 ms 60 ms sjce-wan-gw1.cisco.com [171.69.8.17]
3 40 ms 70 ms 70 ms sjce-wbb-gw1.cisco.com [10.18.255.1]
4 60 ms 70 ms 60 ms sjce-rbb-gw1.cisco.com [171.69.7.233]
5 71 ms 70 ms 60 ms sjce-sbb1-gw1.cisco.com [171.69.14.34]
6 80 ms 51 ms 70 ms sjck-as-gw2.cisco.com [171.69.14.246]
7 60 ms 90 ms 80 ms sj-frame-1.cisco.com [171.70.192.54]
8 150 ms 180 ms 161 ms 10.19.253.225
9 141 ms 160 ms 170 ms 10.19.253.228
Trace complete.
Argument Description
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list.
-w timeout Wait timeout milliseconds for each reply.