Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

C-18
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
unlock guiadmin
To unlock a GUI administrator account that a remote user can use to access the ACS web GUI, use the
unlock guiadmin command:
unlock guiadmin [admin] [password]
Syntax Description
admin Username for the GUI account.
password Password for the GUI account.
Usage Guidelines
During initial installation, the setup script prompts the installer to set up a GUI administrator account
that remote users can use to access and configure the ACS solution engine. This account cannot be used
until you unlock it by issuing the unlock guiadmin command.
In addition, you can add additional GUI administrator accounts by using the add guiadmin command.
These accounts are not usable until they are unlocked by using the unlock guidamin command. And, if
a GUI administrator account has been locked using the lock guiadmin command, you can use the unlock
guiadmin command to unlock the account.
Example
The following command unlocks a GUI administrator account joeadmin with the password joltinjoe:
unlock guiadmin joeadmin joltinjoe
upgrade
To perform the second stage of an upgrade, use the upgrade command:
upgrade
Note This command typically reboots the ACS services, which means that AAA services are interrupted.
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the upgrade command to install an upgrade package that you have already loaded to the ACS SE.
Ensure that you have stopped CSAgent prior to employing the upgrade command.
Example
The following initiates the second stage of an upgrade:
upgrade

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English