Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

4-8
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 4 Administering Cisco Secure ACS Solution Engine
Working with System Data
For more information on ACS SE commands, see Appendix C, “Command Reference.”
Working with System Data
This section explains basic data-manipulation tasks performed from a serial console connected to the
ACS SE:
• Obtaining Support Logs From the Serial Console, page 4-9
• Exporting Logs, page 4-10
• Exporting a List of Groups, page 4-11
• Exporting a List of Users, page 4-12
• Backing Up ACS Data From the Serial Console, page 4-12
ntpsync Perform Network Time Protocol synchronization
ping Verify connections to remote computers
reboot Soft reboot appliance
restart Restart ACS services
restore Restore Appliance
rollback Rollback patched package
set admin Set administrator's name
set dbpassword Set database password
set domain Set DNS domain
set hostname Set appliance's hostname
set ip Set IP configuration
set password Set administrator's password
set time Set timezone, enable NTP synch, or set date and
time
set timeout Set the timeout for serial console with no activity
show Show appliance status
shutdown Shut down appliance
start Start ACS services
stop Stop ACS services
support Collect logs, registry, and other useful
information
tracert Determine the route take to a destination
upgrade Upgrade appliance (stage II)
Table 4-1 ACS SE Commands (continued)
Command Description

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English