Cisco CSR 1000v Series User Manual

Step 4
Convert the PAK to a license by entering the PAK and the UDI into the Cisco Product License registration portal: http:/
www.cisco.com/go/license
Example:
When entering the UDI, enter only the 11-character serial number; for example,
966975BITWG
. The UDI is case-sensitive, and should be entered in all capital letters.
After entering the appropriate information, you will receive an e-mail containing the license information that you can
use to install the license:
•
Copy the license file received from the Cisco Product License Registration portal to the appropriate file system on
the device.
Step 5
license install stored-location-url
Example:
Router# license install bootflash:90NVHJ3C26E_20140724194119019.lic
Installs the license.
•
Accept the end-user license agreement if prompted.
Step 6
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 7
license boot level {ipbase | security | ax | appx}
Example:
Router(config)# license boot level ax
Activates the license on the Cisco CSR 1000v upon the next reload.
Step 8
end
Example:
Router(config)# end
Exits configuration mode.
Step 9
write memory
Example:
Router# write memory
Saves the running configuration to NVRAM.
Step 10
reload
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
160
Installing Cisco CSR 1000v Licenses
Installing CSL Regular Licenses for Cisco IOS XE 3.13S and Later

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English