Name: Cisco CSR 1000v Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 5

When prompted, enter the filename as you want it to appear on the router. Typically, the same filename is entered as

was used in the previous step.

Example:

Destination filename ? csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin

Step 6

If an error message appears that says, “Not enough space on device,” do the following:

•

If you are certain that all the files in bootflash memory should be erased, enter y when prompted twice to confirm

that bootflash memory will be erased before copying:

Example:

Accessing tftp://10.10.10.2/csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin...

Erase bootflash: before copying? [confirm] y

Erasing the flash filesystem will remove all files! Continue? [confirm] y

Erasing device...

•

If you are not certain that all files in bootflash memory should be erased, press Ctrl-Z.

Step 7

If the error message does not appear, enter no when prompted to erase the bootflash memory before copying:

Example:

Accessing tftp://10.10.10.2/csr1000v-universalk9.03.10.00.S.153-3.S-ext.SPA.bin...

Erase bootflash: before copying? [confirm] no

Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide

204

Upgrading the Cisco IOS XE Software

Using TFTP or Remote Copy Protocol to Copy the System Image into Boot Flash Memory

Questions and Answers:

Need help?

Do you have a question about the Cisco CSR 1000v Series and is the answer not in the manual?

Cisco CSR 1000v Series Specifications

General