Cisco CSR 1000v Series User Manual

SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
contact-email-addr email-address
4.
phone-number +phone-number
5.
street-address street-address
6.
customer-id text
7.
site-id text
8.
contract-id text
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Enters the Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 2
Designates your email address. Enter up to 200 characters in email
address format with no spaces.
contact-email-addr email-address
Example:
Router(cfg-call-home)# contact-email-addr
username@example.com
Step 3
(Optional) Assigns your phone number.
phone-number +phone-number
Step 4
Example:
Router(cfg-call-home)# phone-number
+1-800-555-4567
The number must begin with a plus (+) prefix and may
contain only dashes (-) and numbers. Enter up to 17
characters. If you include spaces, you must enclose your
entry in quotes (“”).
Note
(Optional) Assigns your street address where RMA equipment
can be shipped. Enter up to 200 characters. If you include spaces,
you must enclose your entry in quotes (“”).
street-address street-address
Example:
Router(cfg-call-home)# street-address “1234
Step 5
Picaboo Street,
Any city, Any state, 12345“
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
235
Configuring Call Home for the Cisco CSR 1000v
Configuring Contact Information

Cisco CSR 1000v Series Specifications

General

Model	CSR 1000v Series
Category	Network Router
Virtualization	Yes
Form Factor	Virtual Appliance
Routing Protocols	BGP, OSPF, EIGRP, RIP, IS-IS
Minimum Memory	4 GB
Minimum vCPUs	1
Cloud Platforms	Microsoft Azure
Interfaces	Virtual Interfaces
Supported Protocols	IPv4, IPv6
VPN Protocols	IPSec, DMVPN
Security	IPS
High Availability	VRRP, HSRP, GLBP
Management	NETCONF, RESTCONF, SNMP
Management Interface	CLI