Cisco CSR 1000v Series User Manual

SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
alert-group {all | configuration | environment | inventory | syslog | crash | snapshot}
4.
profile name
5.
subscribe-to-alert-group configuration[periodic {daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
6.
subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm | weekly day hh:mm}]
7.
subscribe-to-alert-group syslog[severity {catastrophic | disaster |fatal | critical | major | minor |
warning |notification | normal | debugging}][pattern string]
8.
subscribe-to-alert-group crash
9.
subscribe-to-alert-group snapshot [periodic {daily hh:mm | hourly mm | interval mm | monthly date
hh:mm | weekly day hh:mm}]
10.
end
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 1
Enters Call Home configuration submode.call-home
Example:
Router(config)# call-home
Step 2
Enables the specified alert group. Use the keyword all to enable
all alert groups. By default, all alert groups are enabled.
alert-group {all | configuration | environment |
inventory | syslog | crash | snapshot}
Example:
Router(cfg-call-home)# alert-group all
Step 3
Enters Call Home destination profile configuration submode for
the specified destination profile.
profile name
Example:
Router(cfg-call-home)# profile profile1
Step 4
Subscribes this destination profile to the Configuration alert group.
The Configuration alert group can be configured for periodic
notification, as described in Periodic Notification, on page 244.
subscribe-to-alert-group configuration[periodic
{daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
Example:
Router(cfg-call-home-profile)#
Step 5
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
242
Configuring Call Home for the Cisco CSR 1000v
Subscribing to Alert Groups

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English