Cisco CSR 1000v Series User Manual

PurposeCommand or Action
•
The shared-secret configured in this step should match the
shared-secret configured on Cisco Prime Network Services
Controller. Once configured, only the encrypted version of the
shared secret is displayed.
When remote management by Cisco Prime Network Services
Controller is enabled using this command, the REST API PUT,
POST, and DELETE operations are disabled. However, the GET
operation is still available.
Note
Exits configuration mode and enters privileged EXEC mode.end
Example:
Router(config-remote-mgmt)# end
Step 5
Displays the Cisco CSR 1000v remote management settings.show remote-management status
Example:
Router# show remote-management status
RESTful-API: enabled
https port: 443
PNSC CPA: enabled
Host 172.27.208125 port 8443
shared-secret *******
Step 6
What to Do Next
Once remote management by Cisco Prime Network Services Controller is enabled, the following warning is
displayed when entering the Cisco IOS XE CLI mode directly on the router:
WARNING: This device is managed by Prime Network Services Controller. RESTful API is read
only. Changing configuration using CLI is not recommended.
See documentation for Cisco Prime Network Services Controller.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
294
Configuring Support for Remote Management by the Cisco Prime Network Services Controller
Enabling Remote Management by the Cisco Prime Network Services Controller Host

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English