Cisco CSR 1000v Series User Manual

Table 13: Accessing and Exiting Command Modes
Exit MethodPromptAccess MethodCommand Mode
Use the logout command.
Router>
Log in.User EXEC
To return to user EXEC mode,
use the disable command.
Router#
From user EXEC mode, use the
enable EXEC command.
Privileged EXEC
To return to privileged EXEC
mode from global configuration
mode, use the exit or end
command.
Router(config)#
From privileged EXEC mode,
use the configure terminal
privileged EXEC command.
Global configuration
To return to global
configuration mode, use the exit
command.
To return to privileged EXEC
mode, use the end command.
Router(config-if)#
From global configuration
mode, specify an interface using
an interface command.
Interface configuration
Entering a question mark (?) at the CLI prompt displays a list of commands available for each command
mode. You can also get a list of keywords and arguments associated with any command by using the
context-sensitive help feature.
To get help specific to a command mode, a command, a keyword, or an argument, use one of the commands
listed in the table below.
Table 14: Help Commands and Purpose
PurposeCommand
Provides a brief description of the help system in any
command mode.
help
Provides a list of commands that begin with a
particular character string. (No space between
command and question mark.)
abbreviated-command-entry?
Completes a partial command name.abbreviated-command-entry<Tab>
Lists all commands available for a particular
command mode.
?
Lists the keywords or arguments that you must enter
next on the command line. (Space between command
and question mark.)
command ?
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
55
Using Cisco IOS XE Software
Using Cisco IOS XE Software

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English