Cisco D9865 User Manual

4-68 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
To configure the Warning settings
1. From the Alarms & Warnings screen, press the blue button (Warning) on the
remote control.
2. Set the following warning options:
Send Trap
(D9865D only)
When set to Yes, the SNMP trap message will be
sent to the trap destination; otherwise the fault
message will be ignored.
Warning Setting Description
Warning Name Displays a list of the warning messages. You can
scroll through the list using the
 buttons.
Warning Enable When set to Yes, the warning message will be
reported. When set to No, the fault won’t be
reported.
Send Trap
(D9865D only)
When set to Yes, the SNMP trap message will be
sent to the trap destination; otherwise the warning
message will be ignored.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English