Cisco D9865 User Manual

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-73
Viewing Hardware Information
To View the Hardware Information
Proceed as follows to view the hardware information.
From the Info screen, select Hardware Information and press OK.
The following table displays the hardware information:
Hardware Information Description
Model Indicates the model number of the receiver.
Board Indicates the board type.
Revision Indicates the board revision number.
Tracking ID This is the unique Tracking ID number that
identifies the product version.
PWB Serial Number Displays the serial number for the PWB (printed
wiring board).
MAC Address 1,
MAC Address 2
(D9865D only)
Indicates the MAC addresses assigned to the
Ethernet interface at the time of manufacture.
IP Address 1 and IP
Address 2 (D9865D
only)
Indicates the IP address assigned to the receiver in
a network for Port 1 and Port 2.
Note: Only Port 1 is available for this release.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English