Cisco D9865 User Manual

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-33
Setting up the Video
Setting up the Video
The video format is set to the standard format for your country. If you attempt to
change the format of the source video signal, a warning message appears, to inform
you that if the fields are incorrectly configured, the display may not be viewable.
Check with your satellite or local service provider before changing the video
settings to ensure it is set correctly. Press OK to continue with the edit. Otherwise,
select Cancel.
Note: If an error was made when changing the video settings, you can set the TV
video format using the front panel. For more information, see Setting the TV Video
Format, on page 3-4.
Proceed as follows to set up the video information.
1. From the Setup Menu screen, select Video Setup and click OK.
2. The following table describes each of the options in the Video Setup screen.
Selection Options Description Default
HD Video Output Auto Receiver automatically detects correct HD
video format.
Auto
HD 1080i Sets the HD output video format.
HD 720p

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English