Cisco D9865 User Manual

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-85
Viewing ADP Status
To View the ADP Status
Proceed as follows to view the ADP Status screen.
From the Info screen, select ADP Status and press OK.
The following table describes the ADP status information displayed:
ADP Status Description
ISE UA Indicates the ISE User Address (14 hexadecimal
characters).
ADP(ENC) Passed Indicates the current Encrypted Addressed Data
Packet Count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP(ENC)
Passed and ADP(ENC) Total Received numbers
should be identical.
ADP(ENC) Total
Received
Indicates the total Encrypted Addressed Data
Packet Count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP(ENC)
Passed and ADP(ENC) Total Received numbers
should be identical.
ADP(NON) Passed Indicates the current Non-Encrypted Addressed
Data Packet count. This count indicates the amount
of transmitted ADP information being accurately
received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers
should be identical.

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English