Cisco D9865 User Manual

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-77
Viewing DVB-CI Information
The Common Interface (CI) slot is located behind the door on the front panel. They
allow use of a CAM (Conditional Access Module) Smartcard to decrypt purchased
programming.
Note: You must be authorized to view the programming available via the Smart
Card from your service provider.
Note: CAMs must be purchased from Cisco. For a list of the supported CAMs, see
Common Interface Modules, on page 3-5.
For more information on configuring the CI information, see Configuring the
Common Interface (CI) Information, on page 5-28.
To View the Current DVB-CI Information
Proceed as follows to view the DVB-CI information:
From the Info screen, select DVB-CI and press OK.
The DVB-CI Information screen displays the following information:
DVB-CI Information Description
CI System Name Indicates the system name of the CAM.
CAM Manufacturer Displays the manufacturer name of the CAM.
CAM Serial Number Indicates the unique serial number of the CAM.
CAM Product Name Displays the product name of the CAM.
CAM Hardware Version Displays the hardware version number of the CAM.
CAM Application
Version
Displays the software version number of the CAM.
CAM Status Displays the status of the CAM (Ready or Not
Ready).

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English