Cisco D9865 User Manual

7-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
Messages
General
The status of the D9865 receiver and its immediate surroundings is reported to the
receiver in the form of messages and alarms. You can enable or disable messages in
the Alarms & Warnings advanced settings.
D9865 Receiver Message List
The following table shows a list of the available messages and their default alarm
status. The Set Messages and Clear Messages are displayed in the Warning History
when the messages are set or cleared respectively.
Alarms
Alarm Message
Type
Message Cause/Remedy Description Severity
Signal Status Set Signal is lost Cause: Loss of RF
signal. Loss of RF
lock. Loss of
Transport data.
Invalid frequency or
other tuning
parameters.
Remedy: Check
cables. Check tuning
parameters.
Loss of signal Minor
RF Signal - No
Content
RF Tuner locked,
but no TS
content.
Tuning Parameters
Invalid
One of the
tuning
parameters is
invalid
Clear Signal is locked Signal OK
Tuning Parameters
Valid
Tuning
parameters are
valid

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English