4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-3
Logging on to the Web GUI
To Log on to the Web GUI
Proceed as follows to log on to the Web GUI:
1. Open MS Internet Explorer.
2. Type the IP address of the D9865 Satellite Receiver in the address bar and press
Enter.
3. Type the Username and Password.
Note: The username and password are case-sensitive. The default username is
admin and the default password is localadmin. If you have forgotten your
username and password, you can reset them to its factory defaults from the on-
screen menu of the D9865 Satellite Receiver. For more information, refer to
System Information, on page 4-71.
Important: The password and user name will be remembered for the whole
web session. Close the web browser if you want to prevent others from
accessing the settings of the D9865 Satellite Receiver.
If your session expires, you must refresh the browser and log back in.
4. Click Log In.
Note: If you select Remember username, the user name will be remembered
the next time you log into the web GUI.
To Next Page
Loading...
Need help?
General
