5-26 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
Setting the Channel Information
To set the Channel Selection
Proceed as follows to select a channel and view the channel information:
1. From the user interface of the D9865, click Input > Channel. The Channel
Selection page is displayed.
2. Select the Channel number from the list of available channels.
Note: Subscriber uplink services made available to your satellite receiver are
associated with virtual channels. These channels can include video, audio, and/
or data services. All authorized virtual channel services are provided via
PowerVu Network Centre (PNC) system software and broadcast facility
equipment, and are decoded by the receiver. You can view available subscriber
services for any received virtual received channel on this menu and tune to the
selected channel by entering the particular channel number.
3. Click Apply. The channel is selected and the selected channel is displayed on-
screen.
4. The Channel Status section displays the following information:
Channel Information Description
Conditional Access
System
Indicates the type of CA used for the received
signal.
To Next Page
Loading...
Need help?
General
