4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-37
Configuring Captions
To Set Up the Caption Parameters
Proceed as follows to set up the caption parameters:
1. From the user interface of the D9865, click Audio & Video, expand Video Setup
and then click Captions. The Captions page is displayed.
2. Select the Preferred Closed Caption Mode. There are multiple in the stream.
The default is Auto.
Note: SA Custom is not supported when telecine video coding is enabled.
3. The Status section displays the actual caption mode used. This is read-only.
4. Click Apply.
To Next Page
Loading...
