5-22 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
Setting up the Tuning Presets/LNB, Continued
8. Type the Symbol Rate. The symbol rate must match that of transmitted signal.
You can enter a value in the range from 1.0 to 45.0 MS/s for DVB-S or 1.0 to 31.0
MS/s for DVB-S2.
9. The Last Activated Preset displays the number of the last activated preset.
10. The Current Input Status section displays the current RF Tuning Status
information, including the downlink frequency and signal status.
11. Click Apply to Preset to apply the settings to the receiver.
Click Activate to choose the preset. This will activate the currently displayed
preset as the active preset. You will be prompted to accept the new preset and
warned that service interruption will occur.
To Next Page
Loading...
Need help?
General
