Cisco D9865 User Manual

7-18 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
HDMI:Not an Auth
Device
Set HDCP authentication
failed
Cause: HDMI monitor is
not authorized to receive
HDMI content or it does
not support HDCP.
Remedy: Disconnect HDMI
monitor to restore video
decode or use an HDMI
monitor that properly
supports HDCP.
HDMI monitor does
not contain valid
HDCP keys. Video
decode is disabled.
Receiver not HDCP
capable
HDMI monitor does
not support HDCP.
Video decode is
disabled.
Clear HDCP
Authentication
Process Not Started
HDMI monitor is not
connected.
Connect an HDMI or
DVI capable monitor,
if desired.
HDCP authentication
success
HDMI monitor is
connected and
authorized to receive
HDMI content.
TV-Out Settings
Problem
Set Invalid configuration
data
Cause: Incorrect video
setup settings.
Remedy: Check the video
setup settings: TV Channel
Number and SD Video
Output format. For PAL
device, use channel 21
through 69 and SD Format
PAL-x. For NTSC device,
use channel 3 or 4 and SD
Format NTSC or NTSC-J.
Notify customer service if
problem persists.
Invalid TV-Out
configuration data
provided.
Clear Valid configuration
data
Valid TV-Out
configuration data
provided.
Warning Message
Type
Message Cause/Remedy Description

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English