Cisco D9865 User Manual

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-51
Setting up POV Mode, Continued
5. The Service List Mode indicates which tables are used to obtain tuning and
channel lists. This only applies when Acquisition Mode is set to Custom. Select
Rigorous if all default settings must be present in the received signal. Select
Degraded and only the table parameters present in the received signal will be
used to install the receiver.
The following table displays the default settings for the allowed service lists and
frequency tuning settings.
Allowed Service Lists Auto Basic Custom
BAT No No No
NIT Yes Yes No
SDT Yes No No
PAT Yes No Yes
Tuning Source NIT NIT Preset

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English