Contents
xii
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Configuring Radio Management 12-28
CLI Configuration Example 12-29
Configuring Access Points to Participate in WIDS 12-30
Configuring the Access Point for Scanner Mode 12-30
Configuring the Access Point for Monitor Mode 12-30
Displaying Monitor Mode Statistics 12-31
Configuring Monitor Mode Limits 12-32
Configuring an Authentication Failure Limit 12-32
Configuring WLSM Failover 12-32
Resilient Tunnel Recovery 12-32
Active/Standby WLSM Failover 12-33
Configuring RADIUS and TACACS+ Servers 13-1
Configuring and Enabling RADIUS 13-1
Understanding RADIUS 13-2
RADIUS Operation 13-2
Configuring RADIUS 13-3
Default RADIUS Configuration 13-4
Identifying the RADIUS Server Host 13-4
Configuring RADIUS Login Authentication 13-7
Defining AAA Server Groups 13-9
Configuring RADIUS Authorization for User Privileged Access and Network Services 13-11
Configuring Packet of Disconnect 13-12
Starting RADIUS Accounting m 13-13
Selecting the CSID Format 13-14
Configuring Settings for All RADIUS Servers 13-15
Configuring the Access Point to Use Vendor-Specific RADIUS Attributes 13-16
Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication 13-17
Configuring WISPr RADIUS Attributes 13-18
Displaying the RADIUS Configuration 13-19
RADIUS Attributes Sent by the Access Point 13-20
Configuring and Enabling TACACS+ 13-23
Understanding TACACS+ 13-23
TACACS+ Operation 13-24
Configuring TACACS+ 13-24
Default TACACS+ Configuration 13-25
Identifying the TACACS+ Server Host and Setting the Authentication Key 13-25
Configuring TACACS+ Login Authentication 13-26
To Next Page
Loading...
