Cisco NCS 5000 Series

hello-interval 15
address-family ipv4 unicast
## Inherited from group isis
metric 50
!
!
interface TenGigE0/2/0/0.3526
## Inherited from group isis
lsp-interval 40
## Inherited from group isis
hello-interval 15
## Inherited from group isis
address-family ipv4 unicast
## Inherited from group isis
metric 50
!
!
interface TenGigE0/2/0/0.3527
## Inherited from group isis
lsp-interval 40
## Inherited from group isis
hello-interval 15
## Inherited from group isis
address-family ipv4 unicast
## Inherited from group isis
metric 50
!
!
interface TenGigE0/2/0/0.3528
## Inherited from group isis
lsp-interval 40
## Inherited from group isis
hello-interval 15
## Inherited from group isis
address-family ipv4 unicast
## Inherited from group isis
metric 50
!
!
interface TenGigE0/2/0/1
## Inherited from group isis
lsp-interval 40
## Inherited from group isis
hello-interval 15
address-family ipv4 unicast
## Inherited from group isis
metric 50
!
!
!
4
Verify the actual functionality:
RP/0/RP0/CPU0:router# show isis interface TenGigE0/2/0/0.3528 | inc Metric
Metric (L1/L2): 50/50
OSPF Hierarchy: Example
This example illustrates hierarchical inheritance and priority. The configuration that is lower in hierarchy gets
the highest priority.
1
Configure a local OSPF configuration:
RP/0/RP0/CPU0:router# show running router ospf
router ospf 1
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
101
Configuring Flexible Command Line Interface
OSPF Hierarchy: Example