Cisco NCS 5000 Series User Manual

Holdtime : 145 sec
Version :
Cisco IOS XR Software, Version 0.48.0[Default]
Copyright (c) 2004 by cisco Systems, Inc.
advertisement version: 2
The following is sample output for the show cdp interface command. In this example, CDP information
related to Packet over SONET/SDH (POS) interface 0/4/0/0 is displayed.
RP/0/RP0/CPU0:router# show cdp interface pos 0/4/0/0
POS0/4/0/0 is Up
Encapsulation HDLC
Sending CDP packets every 60 seconds
Holdtime is 180 seconds
The following is sample output for the show cdp traffic command:
RP/0/RP0/CPU0:router# show cdp traffic
CDP counters :
Packets output: 194, Input: 99
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Truncated: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 194, Input: 99
Unrecognize Hdr version: 0, File open failed: 0
The following is sample output for the show cdp traffic command. In this example, the optional location
keyword and node-id argument are used to display information about the traffic gathered between devices
using CDP from the specified node.
RP/0/RP0/CPU0:router# show cdp traffic location 0/4/cpu0
CDP counters :
Packets output: 16, Input: 13
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Truncated: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 16, Input: 13
Unrecognize Hdr version: 0, File open failed: 0
Configuration Examples for Implementing CDP
Enabling CDP: Example
The following example shows how to configure CDP globally and then enable CDP on Packet over
SONET/SDH (POS) interface 0/3/0/0:
cdp
interface POS0/3/0/0
cdp
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
63
Implementing CDP
Configuration Examples for Implementing CDP

Cisco NCS 5000 Series Specifications

General

Brand	Cisco
Model	NCS 5000 Series
Category	Network Router
Language	English