6
Triple Data Encryption Standard
7
Advanced Encryption Standard
Use of 3DES and AES encryption standards requires that the security package (k9sec) be installed. For
information on installing software packages, see Upgrading and Managing Cisco IOS XR Software.
SNMPv3 Benefits
SNMPv3 provides secure access to devices by providing authentication, encryption and access control. These
added security benefits secure SNMP against the following security threats:
• Masquerade—The threat that an SNMP user may assume the identity of another SNMP user to perform
management operations for which that SNMP user does not have authorization.
• Message stream modification—The threat that messages may be maliciously reordered, delayed, or
replayed (to an extent that is greater than can occur through the natural operation of a subnetwork service)
to cause SNMP to perform unauthorized management operations.
• Disclosure—The threat that exchanges between SNMP engines could be eavesdropped. Protecting
against this threat may be required as a matter of local policy.
In addition, SNMPv3 provides access control over protocol operations on SNMP managed objects.
SNMPv3 Costs
SNMPv3 authentication and encryption contribute to a slight increase in the response time when SNMP
operations on MIB objects are performed. This cost is far outweighed by the security advantages provided
by SNMPv3.
Table 1 shows the order of response time (from least to greatest) for the various security model and security
level combinations.
Table 4: Order of Response Times from Least to Greatest
Security LevelSecurity Model
noAuthNoPrivSNMPv2c
noAuthNoPrivSNMPv3
authNoPrivSNMPv3
authPrivSNMPv3
User-Based Security Model
SNMPv3 User-Based Security Model (USM) refers to SNMP message-level security and offers the following
services:
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
24
Implementing SNMP
SNMPv3 Benefits
To Next Page
Loading...
Need help?
General
