Cisco NCS 5000 Series User Manual

PurposeCommand or Action
Example:
RP/0/RP0/CPU0:router(config-ntp)#
end
exiting(yes/no/cancel)?
[cancel]:
◦
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and returns the
router to EXEC mode.
or
RP/0/RP0/CPU0:router(config-ntp)#
commit
◦
Entering no exits the configuration session and returns the router
to EXEC mode without committing the configuration changes.
◦
Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration changes.
•
Use the commit command to save the configuration changes to the
running configuration file and remain within the configuration session.
Additional References
The following sections provide references related to implementing NTP on Cisco IOS XR software.
Related Documents
Document TitleRelated Topic
Clock Commands on module of System
Management Command Reference for Cisco NCS
5000 Series Routers
Cisco IOS XR clock commands
NTP Commands on module of System Management
Command Reference for Cisco NCS 5000 Series
Routers
Cisco IOS XR NTP commands
Information about getting started with Cisco IOS XR
Software
Cisco IOS XR master command index
Configuring AAA Services on module of System
Security Configuration Guide for Cisco NCS 5000
Series Routers
Information about user groups and task IDs
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
168
Implementing NTP
Additional References

Cisco NCS 5000 Series Specifications

General

Brand	Cisco
Model	NCS 5000 Series
Category	Network Router
Language	English