21 Copyright © 2024 Cisco Systems, Inc. All rights reserved.D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
4.4. Fasten the modules
×2
2. Fasten the modules to the beam with 4 screws (M6x8, Hex 4 mm) in total. The screws enter the
nuts that you added in ste p 4.1.
1. Fasten both side modules to the center module with 2 screws (M6x8, Hex 4 mm) each.
2x
4x
2x
×2
×2
×2
To Next Page
Loading...