Cisco SG350-10MP Administration Guide

Administration: Stack Management
Unit ID Assignment
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 122
8
The following shows a case where one of the duplicate units (auto-numbered) is renumbered.
Duplicate Unit Renumbered
The following shows a case where one of the duplicate units is renumbered. The one with the
lower MAC retains its unit ID (see Master Selection Process for a description of this process).
Duplication Between Two Units With Auto Number Unit ID
NOTE If a new stack has more than the maximum number of units, all extra units are shut down.

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)