Cisco SG350-10MP Administration Guide

11
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 193
Smartport
This document describes the Smartports feature.
It contains the following topics:
•Overview
• How the Smartport Feature Works
• Auto Smartport
• Error Handling
• Default Configuration
• Relationships with Other Features
• Common Smartport Tasks
• Configuring Smartport Using The Web-based Interface
• Built-in Smartport Macros
Overview
The Smartport feature is designed to provide a means of quickly configuring network devices,
such as IP phones, printers, routers and Access Points (APs).
Using this feature, you create a “Smartport” macro, which is simply a script containing CLI
commands. These CLI commands specify the device configuration. After creating a Smartport
macro, it is applied to one or more devices. The result is that these devices share a common
configuration.
The Smartport feature works in conjunction with other features such as:
• Voice VLAN and Smartport, described in the Voice VLAN section.

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)