Cisco SG350-10MP Administration Guide

26
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 440
Security: IPv6 First Hop Security
This section describes how IPv6 First Hop Security (FHS) works and how to configure it in
the GUI.
It covers the following topics:
• IPv6 First Hop Security Overview
• Router Advertisement Guard
• Neighbor Discovery Inspection
• DHCPv6 Guard
• Neighbor Binding Integrity
•IPv6 Source Guard
• Attack Protection
• Policies, Global Parameters and System Defaults
• Common Tasks
• Default Settings and Configuration
• Configuring IPv6 First Hop Security through Web GUI

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)